Wemos and DHT11 example in Micropython
In this example we look at a DHT11 example in Micropython for an ESP8266. Once again we use uPyCraft and again we use Wemos...
Wemos Mini ADXL345 example
The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is formatted...
ESP8266 and MCP23017 example
The is a 16-bit, general purpose parallel I/O port expander for I2C bus applications.
The 16-bit I/O port functionally consists of two 8-bit ports (PORTA...
Some Neopixel examples
This example takes the Wemos Mini Ws2812B example a bit further on and use an 8 LED Neopixel strip
Here is an image of the strip we...
Wemos and SHT11 example
The SHT1x digital humidity sensor is a reflow solderable sensor. The SHT1x series consists of a low-cost version with the SHT10 humidity sensor, a...
ESP8266 and MLX90393 magnetic field sensor example
The MLX90393 magnetic field sensor can be reprogrammed to different modes and with different settings at run-time. The sensor offers a 16-bit output proportional...
Wemos Mini and DHT Pro example
In this example we connect the DHT22 Single Bus Digital Temperature Humidity Sensor (DHT Pro shield) to our Wemos Mini , you can see this...
ESP8266 and a BH1745NUC Luminance and Colour Sensor
In this article we look at a BH1745NUC Luminance and Colour Sensor and connect it to a Wemos Mini
First of all lets take a...
VEML6070 ultraviolet light sensor and ESP8266
In this example we look at an VEML6070 UV sensor and connect it to an Arduino UNO
VEML6070 is an advanced ultraviolet (UV) light sensor...
Wemos Mini Ws2812B example
In this example we connect a Wemos Ws2812B RGB shield to a Wemos mini, we will then loop through red, green and blue colors
The...
DHT11 sensor data to Thingspeak using a Wemos D1
In this example we will connect a DHT11 sensor to our Wemos D1, we will then send the temperature and humidity values to thingspeak.
DHT11...
Wemos Mini and LIS3MDL magnetic field sensor example
In this article we look at another sensor - this time its the LIS3MDL which is a 3-axis MEMS magnetic field sensor, digital output,...
Wemos Mini and PIR sensor example
In this example we connect a PIR module to a Wemos Mini. A passive infrared sensor (PIR sensor) is an electronic sensor that measures infrared...
ESp8266 and force sensitive resistor example
A force-sensing resistor is a material whose resistance changes when a force or pressure is applied.
Force-sensing resistors consist of a conductive polymer, which changes...
Wemos mini and US-026 Ultrasonic Detector example
In this article we look an ultrasonic module that works well with a Wemos Mini in that it will work with 3.3v.
The US-026 is...
Wemos and a MQ-135 sensor
MQ-135 gas sensor is a hazardous gas detection apparatus for the family, the environment, suitable for ammonia, aromatic compounds, sulfur, benzene vapor, smoke and other...