Wemos Mini and a PCF8574
The PCF8574 is an 8 bits I/O port expander that uses the I2C protocol. Using this IC, you can use only the SDA and...
Wemos and LIS2DH three-axis linear accelerometer example
The LIS2DH is an ultra low-power high performance three-axis linear accelerometer belonging to the “femto” family, with digital I2C/SPI serial interface standard output.
The LIS2DH...
I2C Scanner
This is a basic example which will display via the serial monitor the address of any devices connected to your Wemos.
Its the same as...
TSL2591 light-to-digital converter and ESP8266 example
In this article we look at another light-to-digital converter - this time its the TSL2591 and we will connect it to a Wemos Mini
First...
A look at various ESP specific APIs
Description
Some ESP-specific APIs related to deep sleep, RTC and flash memories are available in the ESP object. These may be useful, we have already...
Wemos and TEMT6000 light sensor
TEMT6000X01 ambient light sensor is a silicon NPN epitaxial planar phototransistor in a miniature transparent 1206 package for surface mounting. It is sensitive to...
Wemos and LX1972 light sensor example
The LX1972 is a low cost silicon light sensor with spectral response that closely emulates the human eye. Patented circuitry produces peak spectral response...
PCA9685 LED controller and ESP8266 example
In this example we connect a PCA9685 LED controller to an ESP8266
The PCA9685 is an I²C-bus controlled 16-channel LED controller optimized for Red/Green/Blue/Amber (RGBA)...
MQ3 Gas Sensor example
The MQ3 Gas Sensor module is useful for gas leakage detection (in home and industry). It is suitable for detecting Alcohol, Benzine, CH4, Hexane, LPG,...
ESP8266 and CJMCU-1010 capacitive touch module example
In this example we look at the CJMCU-1010 module - this is based on the AT42QT101x
The AT42QT101x Single Key capacitive touch controller family provides an easy...
Wemos RGB led example
In this example we will connect an RGB led to our Wemos MIni, lets look at RGB leds first
RGB LEDs consist of one red,...
Wemos and basic TEA5767 example
The TEA5767HN is a single-chip electronically tuned FM stereo radio for low-voltage applications with fully integrated Intermediate Frequency (IF) selectivity and demodulation. The radio...
ESP8266 and LPS22HB absolute pressure sensor example
In this article we look at another absolute pressure sensor - this time its the LPS22HB
Once again lets look at this sensor from the...
ADS1115 analog-to-digital converter and ESP8266
The ADS1115 device is a precision, low-power, 16-bit, I2C-compatible, analog-to-digital converters (ADCs) offered in an ultra-small, leadless, X2QFN-10 package, and a VSSOP-10 package. The...
DHT11 sensor data to Thingspeak using a Wemos D1
In this example we will connect a DHT11 sensor to our Wemos D1, we will then send the temperature and humidity values to thingspeak.
DHT11...
Wemos and DHT11 example in Micropython
In this example we look at a DHT11 example in Micropython for an ESP8266. Once again we use uPyCraft and again we use Wemos...