Wemos Mini and ISL29125 RGB color light sensor
On this page we take a look at the ISL29125 RED, GREEN and BLUE color light sensor
The ISL29125 is a low power, high sensitivity, RED, GREEN...
ESP8266 and Stepper motor example
In this example we will show a basic stepper motor example, we use a driver board that can be bought on many sites which...
Wemos and LIS2DH three-axis linear accelerometer example
The LIS2DH is an ultra low-power high performance three-axis linear accelerometer belonging to the “femto” family, with digital I2C/SPI serial interface standard output.
The LIS2DH...
Wemos and MAG3110 magnetometer
Freescale’s MAG3110 is a small, low-power, digital 3-axis magnetometer. The device can be used in conjunction with a 3-axis accelerometer to realize an orientation...
Wemos and LDR example
In this example we connect a photoresistor to an Arduino, the value read from the photoresistor corresponds to the amount of light present. The...
ESP8266 and LM75 temperature sensor example
The LM75 temperature sensor includes a delta-sigma analog-to-digital converter, and a digital overtemperature detector. The host can query the LM75 through its I²C interface...
MLX90614 infrared thermometer example
The MLX90614 is a non-contact infrared thermometer with a measurement range from -70 to +380 degree Celsius. Just connect the four leads to your...
Wemos 1.44“ inch TFT LCD shield examples
In this example we look at the 1.44“ inch TFT LCD shield from Wemos. It can display 128×128 resolution and 18-bit color
The TFT is...
BME680 environment sensor and ESP8266 example
In this article we will connect a BME680 sensor to an ESP8266 - as usual we will use a Wemos Mini
BME680 is an integrated...
TSL2591 light-to-digital converter and ESP8266 example
In this article we look at another light-to-digital converter - this time its the TSL2591 and we will connect it to a Wemos Mini
First...
Wemos LSM303 example
The LSM303 3D Accelerometers/Magnetometer Models are a system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor. These best-in-class eCompass devices...
Using a BMP384 pressure sensor with an ESP8266
In this article we look at a temperature and pressure sensor, the BMP384 pressure sensor from Bosch Sensortec, and connect it to an ESP8266...
Wemos Mini ADXL345 example
The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is formatted...
Wemos mini DS18B20 temperature sensor example
The DS18B20 is a temperature sensor that can be used in various simple projects. This part uses the 1 wire (I2C) bus and you can...
Wemos and TMP36 example
The TMP35, TMP36, and TMP37 are low voltage, precision centigrade temperature sensors. They provide a voltage output that is linearly proportional to the Celsius...
Wemos and DS3231 RTC example
The DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO) and crystal.
The device incorporates a battery...