VEML7700 lux sensor and ESP8266 example using the Arduino IDE
In this article we look at a ambient light digital 16-bit resolution sensor - this time its an VEML7700. As per usual we will...
The Wemos PIR shield
A new wemos shield and this time its based on a passive infrared sensor
An overview of a PIR
A passive infrared sensor (PIR sensor) is...
ESP8266 displaying a QR code on an OLED display
In this example we will display a QR code on an OLED display with an ESP8266, in this case a Wemos mini. This will...
QRE1113 IR reflectance sensor and ESP8266 example
The QRE1113 features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. The QRE1113...
Wemos and LM35 temperature sensor
In this example we will connect an LM35 temperature sensor to our Arduino
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is...
MCP4725 Digital-to-Analog Converter example
MCP4725 is a single channel, 12-bit, voltage output Digital-to-Analog Converter with integrated EEPROM and an I2C Compatible Serial Interface.
Again the easiest way to interface...
Wemos and 4051 LED example
The HCF4051 device is a monolithic integrated circuit fabricated in MOS (metal oxide semiconductor) technology available in SO-16 and PDIP-16 packages.
The HCF4051 analog multiplexer/demultiplexer...
Wemos and L9110 Fan module example
In this example we connect an Arduino to a L9110 fan module.
The L9110 is anASIC device control and drive motor design two-channel push-pull power...
ESP8266 and RFID-RC522 module example
In this example we will connect an RFID-RC522 module and connect to a Wemos Mini
The microcontroller and card reader uses SPI for communication ....
Wemos Mini Ws2812B example
In this example we connect a Wemos Ws2812B RGB shield to a Wemos mini, we will then loop through red, green and blue colors
The...
Si1145 sensor and ESP8266 example
Another sensor reaches the desk, this time it is a Si1145 sensor, we will connect it to an ESP8266 and test it out
The Si1145/46/47...
Using a BMP384 pressure sensor with an ESP8266
In this article we look at a temperature and pressure sensor, the BMP384 pressure sensor from Bosch Sensortec, and connect it to an ESP8266...
ESP8266 and OLED Micropython example
In this example we show an example written in Micropython using the uPycraft IDE. This time we will be trying out the Wemos OLED...
SHTC1 digital humidity sensor and ESP8266 example
In this article we look at another digital humidity sensor - this time its the SHTC1 and we will connect it to a Wemos...
DHT12 humidity temperature sensor and ESP8266 example
The DHt12 is an upgraded version of the classic DHT11 humidity temperature sensor, it is fully downward compatible, more precise and adds an I2C...
Wemos and Max6675 example
In this example we take a look at the MAX6675 Cold-Junction-Compensated K-Thermocouple-to-Digital Converter
The MAX6675 performs cold-junction compensation and digitizes the signal from a type-K thermocouple....