ESP8266 and TLV493D layout

TLV493D magnetic sensor and ESP8266 example using the Arduino IDE

In this article we look at a TLV493D magnetic sensor and we will connect it to a Wemos Mini First lets look at the sensor The...

AM2320 temperature and humidity sensor and ESP8266 example

Temperature and humidity combined sensor AM2320 digital temperature and humidity sensor is a digital signal output has been calibrated. Using special temperature and humidity...

ESP8266 and L9110 fan module example

In this example we connect an ESp8266  to a dual L9110 fan module. This is a commonly found, basic low cost module which consists...

Goouuu-S1 ESP8266 RGB led examples

In a previous post we looked at the Goouuu-S1 ESP8266 , on the board you will have seen that there is an RGB led The board uses...

Wemos and dust sensor example

Sharp's GP2Y1010AU0F is an optical air quality sensor it is designed to sense dust particles. An infrared emitting diode and a phototransistor are diagonally...

ESP8266 and MLX90393 magnetic field sensor example

The MLX90393 magnetic field sensor can be reprogrammed to different modes and with different settings at run-time. The sensor offers a 16-bit output proportional...

SHTC1 digital humidity sensor and ESP8266 example

In this article we look at another digital humidity sensor - this time its the SHTC1 and we will connect it to a Wemos...
ESP8266 and AHT20 layout

AHT20 Temperature & Humidity Sensor and ESP8266 example using the Arduino IDE

In this article we look at a AHT20 Temperature & Humidity Sensor and we will connect it to a Wemos Mini First lets look at...

Using a BMP384 pressure sensor with an ESP8266

In this article we look at a temperature and pressure sensor, the BMP384 pressure sensor from Bosch Sensortec, and connect it to an ESP8266...

DHT12 humidity temperature sensor and ESP8266 example

The DHt12 is an upgraded version of the classic DHT11 humidity temperature sensor, it is fully downward compatible, more precise and adds an I2C...

GA1A12S202 light sensor example

In this example we will connect a GA1A12S202 Log-Scale Analog Light Sensor to an Arduino. The features of this sensor are as follows Output voltage increases...

VEML6070 ultraviolet light sensor and ESP8266

In this example we look at an VEML6070 UV sensor and connect it to an Arduino UNO VEML6070 is an advanced ultraviolet (UV) light sensor...

QRE1113 IR reflectance sensor and ESP8266 example

The QRE1113 features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. The QRE1113...

Wemos and ML8511 example

The ML8511 measures the amount of ultra violet rayses contained in sunlight, and it is used for the equipment which displays the suntan by...

ESP8266 and MMA8452 accelerometer example

In this example we will connect a MMA8452Q accelerometer  to an ESP8266 - as usual it's a Wemos Mini Lets look at the sensor The MMA8452Q is a...

Wemos and ADS1015 example

The ADS1015 is a precision analog-to-digital converters (ADCs) with 12 bits of resolution offered in an ultra-small, leadless QFN-10 package or an MSOP-10 package. The...