Wemos LSM303 example
The LSM303 3D Accelerometers/Magnetometer Models are a system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor. These best-in-class eCompass devices...
Wemos Mini and a PCF8574
The PCF8574 is an 8 bits I/O port expander that uses the I2C protocol. Using this IC, you can use only the SDA and...
Wemos Mini ADXL345 example
The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is formatted...
Wemos and ADS1015 example
The ADS1015 is a precision analog-to-digital converters (ADCs) with 12 bits of resolution offered in an ultra-small, leadless QFN-10 package or an MSOP-10 package. The...
Wemos Mini and L3GD20 sensor
The L3GD20 is a low-power three-axis angular rate sensor. This is the module I bought for reference
More information can be found at http://www.st.com/content/st_com/en/products/mems-and-sensors/gyroscopes/l3gd20.html about the...
Wemos Mini and MMA8451 accelerometer
The MMA8451 is a low-power accelerometer with 14 bits of resolution, with the following features:
Embedded functions with flexible user-programmable options, configurable to two interrupt...
Control a Wemos using an application on your PC
In this example we will control an RGB led connected to our Wemos Mini from an application running on our PC. In this example...
Wemos OLED shield example
In this example we look at another terrific little low cost shield for the Wemos mini, this time its the OLED shield. Lets look...
Some Neopixel examples
This example takes the Wemos Mini Ws2812B example a bit further on and use an 8 LED Neopixel strip
Here is an image of the strip we...
Wemos Mini Ws2812B example
In this example we connect a Wemos Ws2812B RGB shield to a Wemos mini, we will then loop through red, green and blue colors
The...
Wemos and TMP36 example
The TMP35, TMP36, and TMP37 are low voltage, precision centigrade temperature sensors. They provide a voltage output that is linearly proportional to the Celsius...
Wemos and L9110 Fan module example
In this example we connect an Arduino to a L9110 fan module.
The L9110 is anASIC device control and drive motor design two-channel push-pull power...
ESp8266 and force sensitive resistor example
A force-sensing resistor is a material whose resistance changes when a force or pressure is applied.
Force-sensing resistors consist of a conductive polymer, which changes...
Wemos and reed switch example
The reed switch is an electrical switch operated by an applied magnetic field. It consists of a pair of contacts on ferrous metal reeds...
IR Line tracking sensor example
This is another example using a sensor from the 37 sensor kit, this time we use the one called the KY-033 Hunt sensor module,...
Connecting a basic Touch sensor
This example shows how to interface a basic touch sensor to our Wemos Mini (esp8266), this sensor came as part of a kit of...